Powerboat Lights

Use

According to the COL.REG.’72, powerboats need to follow a different set of rules regarding the positioning and operation of the navigation lights. Boats under 20 metres need to have stern, side and masthead lights. Powerboats under 12 metres may combine the masthead and stern lights into one all round light. Navigation lights must be operating from sunset to sunrise.

Instructions of Use

Depending on the model, navigation lights can be mounted vertically or horizontally on the surfaces of the boat, and they are connected to the central and auxiliary circuit. Their base is attached to the surface with two or more screws, while the housing is clipped on. Lalizas navigation lights with their round shape and the complete attachment on the surfaces do not let other parts of the boat, like ropes, to be tangled. The new group of navigation lights for powerboats ‘EYE’ is fitted into the boat without leaving any sharp edges. Navigation lights should not be put under any kind of strain. All lights should be positioned in such a place, so as to conform to the regulations.

Maintenance

Regular and proper maintenance is essential if you want your navigation lights to operate properly and for a long time. Therefore, Lalizas suggests that on regular basis you:

- Spray the lights with a silicone spray to protect the casing

- Check the nitrile water resistant seal, and if necessary replace it

- Clean the contacts and spray them with a product that is only for electrical contacts In case the lights stop operating check the lamp and the connection to the circuit

Replacement

All navigation lights must be replaced when the lenses change colour, or you notice crack on the casing, or the crystal.

Internal and external lights

In addition to Navigation and Signal lights, internal and external lights are necessary for the illumination of your boat. They are used for deck lighting, cabin and berth lights. LED lights are also available in red for chart tables and safety lighting at night. LALIZAS offers two lights for such purposes, the LED and the Interior / Exterior Lights. The LED light is fitted with 4 small LED bulbs, while the Interior/ Exterior light uses a 10W festoon bulb. Both lights operate at 12V. Easy to fit, both models are made from UV resistant ABS polycarbonate for durability and long life and are available in various cover colours to ensure a perfect match with your boat.

Mounting

LALIZAS Interior and Exterior Lights are simple to fit to your boat by following these basic instructions:

1. Cut the correct size hole and drill pilot holes to the screws

2. Connect the electrical cables 

3. Fasten the light to the bulkhead, using the three fixing screws 

4. Finally, snap on the outer cover of the light 

Maintenance / Replacement

Interior and Exterior lights need no special maintenance. In case the lights do not operate check the bulb and connections to the main circuit. Replace the bulb if necessary.